Bull Rubber Gasket for Bull Horns?

[Threadcutter]

I do have some Loc-Tite I use. I should’ve mentioned that.

I wouldn't consider LocTite as an "Anti-Seize" compound. But, being a liquid, it will help lubricate threads on installation, if only to a minor degree though.

And, now that I think about it, I'd shy away from using LocTite on stainless to stainless unions on the grille. Particularly on the horn/handles. They're not subject to vibration or mechanical stress.

I still think your best bet is a little purpose designed/manufactured Anti-Seize compound on the screw threads. I use this and it's served me very well over the years;

https://www.amazon.com/Permatex-091...mCqlf4Md8-eq7g9FR0v-WVrImzMaAjClEALw_wcB&th=1

 

[Jim6820]

I still think your best bet is a little purpose designed/manufactured Anti-Seize compound on the screw threads. I use this and it's served me very well over the years;

https://www.amazon.com/Permatex-091...mCqlf4Md8-eq7g9FR0v-WVrImzMaAjClEALw_wcB&th=1

Exactly! And, that’s the right stuff. Note that it is rated for temps to 1800F.

 

[Ol' Smokey]

https://www.mrsilicone.co.in/2023/0...een-regular-anti-seize-and-copper-anti-seize/